You are here: PRODUCTS / Aperio in the Aptus system / E100 S E100 S Features and advantages Communication from Koppla 0020 via RS485 bus to the Access Control System- access decision in the EAC system Can be used with all Scandinavian mortise locks - in wooden, steel and tubular-frame doors Main electronics (RFID + radio) outside - security-relevant electronics inside Outside handle rotates freely - inside handle always engaged Possibility to store up to 10 emergency cards (only used in case of disconnection from theKoppla 0020) LED for status visualisation Keep in mind that the lock itself may have features that are notsupported in the Aptus system. Specifications Technical data Authentication CARD only PIN code No Dimensions 312 x 41 x 10/20 mm (H x W x D) Application versions (VERSION=) Basic = interior and exterior doors up to grade 2 Handles U-Shape or L-Shape Escutcheon finish (FINISH=) Stainless steel brushed (ST) Distance/ Spindle (DISTANCE=) 105 mm with spindle 8 mm Door Thickness (DOOR THICKNESS=) Door leaf between 35 and 95 mm thick, in 10mmincrements Backset > 40 mm Mounting plate (PLATE=) 45 mm or 55 mm Battery 1 x Lithium CR123A Battery life > 40 000 cycles (for max. 3 years) Radio standard IEEE 802.15.4 (2.4 GHz) Encryption (radio communikation) AES 128 bits Distance between the Readerand Koppla 0020 5 m or 25 m depending on the hubtype and building environments Class of protection IP52 Operating temperature range 0–60 °C Humidity < 85 % (condensation free) Status LED (red/green/orange) RFID technology MIFARE™ classic; MIFARE™ DESFire™ EM410x; RFID reading UID / Sektor / Block / Application / Scanning range 4 cm Close Get in touch and we will help you! Get contacts Similar products E100 SKPElectric lock with integrated Mifare proximity reader. E100 S VDoor leaves readers with turn switch. C100 SDoor unit for radio communication with lock.